CBU-ASD-LR Bluetooth control unit, 0-10V / 1-10V / DALI
EAN CBU-ASD-LR
Wireless long-range control unit for any driver with a 0-10V, 1-10V or DALI dimming interface. Acts as both controller and power supply for standalone DALI applications, so multi-channel RGB/RGBW and tunable-white systems need minimal wiring.
- Wirelessly controllable over Bluetooth 5.0 — no gateway device needed
- Automatic fast wireless mesh network formation
- Configurable analog or digital output: 0-10V or standalone DALI
- RGB and colour-temperature control
- Controllable switched mains output
- Dimming from ordinary on/off wall switches
- PIR sensor compatible via smart switching
- Over-the-air firmware updates, Casambi cloud service
- Compact enough to fit inside a luminaire
Powered from 220-240 VAC mains, the CBU-ASD-LR drives one 0-10V driver or a small standalone DALI installation directly, with no separate DALI power supply. The long-range radio suits installations where units sit far apart or behind metalwork.
| Supply voltage | 220-240 VAC, 50 Hz |
| Max mains current | 0.6 A |
| 0-10V output | 0-10 VDC, max 1 driver |
| DALI output | 9-12 VDC |
| Operating frequency | 2402-2480 MHz |
| Max radio output power | +8 dBm |
| Operating temperature | -20 … +50 °C |
| Max case temperature | +75 °C |
| Storage temperature | -25 … +75 °C |
| Relative humidity | 0-80 % non-condensing |
| Wire range | 0.5-1.5 mm² (14-22 AWG) |
| Dimensions | 56.5 x 35.8 x 22.3 mm |
| Weight | 48 g |
| Protection rating | IP20 |
| Protection class | Class II |
Downloads
PTS_EU_CBU-ASD-LR_V1.3.pdf · Datasheet · 1.17MB
⭳ download